140000443022 Genuine Drain Pump 50Hz for AEG, Electrolux Dishwashers F77000M0P F88009M0P F99015IM0P ESF6700ROX ESF6800ROX ESL6610RO

Part 140000443022 is a genuine Electrolux group drain pump for AEG and Electrolux dishwashers, rated for a 50Hz supply. It is linked to the numbers 140000443014 and 1113172306. Listed models are the Electrolux ESF6700ROX, ESF6800ROX and ESL6610RO, and the AEG F77000M0P/AU and F77000W0P/AU, the F88009M0P/AU and F88009W0P/AU, and the F99015IM0P/AU.

Dishwasher not draining or leaving water in the base?

At the end of each wash and rinse, the drain pump empties the sump and pushes the dirty water out through the drain hose. If it fails, water sits in the bottom of the tub after the program, the cycle may stop with a drain fault, or you hear humming or buzzing with no water moving. Broken glass, fruit stickers, bones and seeds often jam the impeller, so check the filter and pump cover for debris before replacing the pump. A pump that runs but grinds or rattles is likely worn.

Part details

• Genuine Electrolux group part 140000443022
• Linked numbers 140000443014 and 1113172306
• Drain pump rated 50Hz
• Listed for AEG F77000, F88009 and F99015 models and Electrolux ESF6700ROX, ESF6800ROX and ESL6610RO

Replacing the drain pump

Unplug the dishwasher and turn off the tap, then bail or sponge out any water in the sump. Take the machine out of its cavity and lay towels down, as water left in the hoses will spill. Photograph the pump's wiring and hose connections, swap the pump over and make sure it locks fully into its housing. Run a short program and watch that it drains without leaks.

Questions about this part

How do I find my AEG or Electrolux model number?

Open the door and look along the side edge of the inner door or tub for the rating label. It shows the model, such as F88009M0P or ESF6700ROX, and a product number. Compare the model with the listed dishwashers before ordering.