140000059034 Genuine Sump to Water Softener Hose 370mm for Electrolux Group Dishwashers

Electrolux part 140000059034 is a genuine 370mm dishwasher hose that runs between the sump and the water softener unit. It's a small internal hose, but a split or perished one can cause leaks under the machine or upset how the softener is supplied with water. As there's no confirmed model list on file, match 140000059034 against your dishwasher's parts list or the old hose before ordering.

Dishwasher leaking from underneath? Check the softener hose

Dishwashers with a built-in water softener pass water through a resin container that removes hardness minerals, which helps prevent white spots and scale. This hose links the softener to the sump at the base of the wash cabinet. With heat, detergent and age, rubber hoses harden, crack and loosen at their joints. A leak here often shows up as water in the base tray, a leak protection error, or a damp floor under the machine. White residue on dishes can also point to a softener problem.

Part details

• Genuine Electrolux part number 140000059034
• Joins the sump to the water softener
• 370mm long
• Internal dishwasher hose

Replacing an internal dishwasher hose

Turn the dishwasher off at the wall and close the tap before sliding it out. Soak up any water sitting in the base tray first. Note the hose route and clamp positions with a photo, as the hose must not kink or rub once the machine is back in place. Fit the new hose, secure the clamps, top up the softener salt if needed and run a short program to check for leaks.

Questions about this part

Will 140000059034 suit my dishwasher?

It suits Electrolux built dishwashers whose parts list shows this number. Compare the length and end shapes with your old hose, which should measure about 370mm, to be sure before you order.