1400000234030 Genuine 1500mm Inlet Feeder Hose for Electrolux Group Dishwashers, 1.5m Water Supply Fill Hose Replacement

At 1500mm long, genuine Electrolux feeder hose 1400000234030 carries water from the tap to the appliance. Its number sits among Electrolux dishwasher parts. There's no model list on file, so check the length and the fittings at each end of your old hose against this one before ordering. If you'd like us to check, send the appliance model number through the parts enquiry form.

Signs your dishwasher inlet hose needs replacing

The feeder hose is the flexible line between the water tap and the inlet valve on the appliance. It sits under pressure whenever the tap is on, so age and kinks take a toll. Look for water pooling under the sink or behind the machine, a bulge or crack in the outer layer, rust or a drip at the threaded ends, and a hose that has been crushed when the machine was pushed back. A kinked or blocked hose can also cause slow filling and fill errors, so straighten it and check the inlet filter screen before blaming the valve.

Part details

• Genuine Electrolux part 1400000234030
• Feeder (inlet) hose, 1500mm long
• Carries water from the tap to the inlet valve
• No model list on file, check length and end fittings

Fitting the new feeder hose

Turn the tap off and unplug the machine before disconnecting anything. Keep a towel and shallow tray handy for the water left in the old hose. Check that each end has a sealing washer in place, then screw the fittings on firmly by hand. Route the hose so it can't kink or get trapped when the machine slides back in. Turn the tap on slowly and check both ends for drips.

Questions about this part

How long is this hose?

Electrolux lists it at 1500mm, which is 1.5 metres. Measure from the tap to the connection point on your appliance and allow some slack, so the hose isn't stretched or kinked once the machine is pushed back into place.