1366044012 Genuine Rear Cooling Fan Wheel 123mm for Electrolux Dryers, Dryer Cooling Air Fan Impeller

Part 1366044012 is the genuine Electrolux rear cooling fan wheel, 123mm across, for Electrolux dryers. It's the impeller that moves cooling air through the back of the machine. A cracked, chipped or loose fan wheel upsets the airflow and is usually noisy. Our records don't list the dryer models, so compare the 123mm diameter and the number on your parts list before you buy.

Dryer noisy or not drying properly?

Dryers move two kinds of air. One stream carries heat and moisture out of the clothes, and on condenser models a separate cooling stream pulls room air across the condenser so the moisture turns back into water. A cooling fan wheel drives that second stream. If blades break off or the hub cracks, the wheel can wobble, scrape the housing or slip on the motor shaft. Expect a rattling, ticking or scraping noise, longer drying times, damp clothes at the end of a cycle, or the dryer cutting out because it's running too hot.

Part details

• Genuine Electrolux part 1366044012
• Rear cooling fan wheel
• 123mm diameter
• Dryer models not on file

Replacing the cooling fan wheel

Unplug the dryer and let it cool down. Remove the back or lower panel as your model requires to reach the fan housing, clearing lint as you go. Note how the old wheel is held on the motor shaft, whether by a clip, nut or thread, and which way it faces. Fit the new wheel, spin it by hand to check it clears the housing, then run a test cycle.

Questions about this part

Is this fan wheel the same as the drum fan?

No. This is listed as the rear cooling fan wheel, which is a separate part from the fan that moves hot air through the drum. Check your parts list to make sure you're replacing the correct fan.