1327642003 Genuine Shock Absorber 80N Dual Stage for Electrolux Front Load Washing Machines, Drum Damper Assembly

Front loaders rely on shock absorbers under the drum to tame vibration, and 1327642003 is a genuine Electrolux assembly rated at 80N with a dual stage action, meaning the damping changes through the stroke. The washer models aren't on our records, so compare the 80N rating and the part number printed on your old absorbers before ordering.

Washing machine banging or walking on spin?

The drum and tub in a front loader hang on springs and sit on shock absorbers that soak up movement as the load tumbles and spins. Once an absorber loses its damping, the tub swings much further than it should. The classic signs are loud thumping during spin, the washer moving across the floor, the drum hitting the cabinet, or the machine stopping with an unbalance fault even with a sensible load. With the power off, push down firmly on the drum through the door opening. If it bounces more than once, the absorbers are worn.

Part details

• Genuine Electrolux part 1327642003
• Shock absorber assembly
• 80N rating
• Dual stage damping
• Washer models not on file

Fitting new shock absorbers

Unplug the washer and turn off the taps. Access is usually from underneath or by removing the front panel, depending on the model. Note the mounting pins or bolts at each end before removing the old absorber. Most machines have two or more, and they're normally replaced as a set so the tub stays even. Run a full spin cycle afterwards to check the machine is settled.

Questions about this part

Should I replace both shock absorbers?

It's best practice. Absorbers wear at a similar rate, and a new one working against a tired one can leave the tub unbalanced. Check how many your washer uses and confirm on the parts list that each position uses 1327642003.