1323159705 Genuine Hose Clamp 65.5mm for Electrolux Washing Machines, Large Diameter Washer Hose Clip

Genuine Electrolux hose clamp 1323159705 has a 65.5mm diameter, a size used on the larger hose connections inside an Electrolux washing machine. Clamps get cut off or distorted when hoses are changed, and reusing a tired one is a common cause of leaks. Check the diameter and the number on your parts list match before you order 1323159705.

Washing machine leaking at a hose joint

Hose clamps keep rubber hoses tight on their spigots while the washer fills, agitates or spins and the hoses flex. A clamp that has rusted, stretched or been opened too many times loses its grip, and water starts to seep from the joint. You might find a puddle under the machine, damp patches on the base, or white detergent tracks running down from a connection. Large diameter joints carry a lot of water, so even a small gap can leak heavily during the wash. Replacing the clamp along with a new hose gives the best seal.

Part details

• Genuine Electrolux part 1323159705
• Hose clamp
• 65.5mm diameter
• Washer models and hose position not on file

Fitting the clamp

Switch the washer off at the wall, turn off both taps and drain any water before pulling hoses. Note the angle of the old clamp so the new one sits where it can be reached later and won't rub on anything. Push the hose fully onto its spigot, position the clamp just behind the bead, and close or tighten it as its type requires. Run a rinse and check for drips.

Questions about this part

How do I know this is the right clamp size?

Measure across the hose where the clamp sits, or check the old clamp's markings. This one is 65.5mm in diameter. Your parts list will show 1323159705 at the joint where it's used.