1321446104 Genuine Door Seal Bellows Gasket for Electrolux Front Load Washing Machines EWF1074

Water on the laundry floor after a wash is often down to a split door seal. Part 1321446104 is the genuine Electrolux bellows gasket for front load washing machines, listed for the EWF1074. You may also see it referenced as 132144611 on older paperwork or parts lists. It's the folded rubber boot that links the cabinet front to the outer tub, creating a watertight ring around the door glass.

Signs the door bellows on your Electrolux washer needs replacing

Every time the door closes, the glass presses against the lip of this bellows, and the folds let the tub move during spin without the seal pulling away. Years of detergent, heat and the odd coin or underwire take their toll. Look for splits in the folds, a torn lip, black mould that won't scrub off, or water dripping from under the door. A seal that smells even after a hot cleaning wash can also be holding water in a tear. Leaving a leak can damage the floor and rust the cabinet.

Part details

• Genuine Electrolux part 1321446104
• Also referenced as 132144611
• Door bellows gasket for front load washing machines
• Listed for the Electrolux EWF1074

Replacing the door bellows

Switch off at the wall and turn off the taps first. Note how the old seal sits and which way any drain hole faces before removing it. Clamp bands hold it at the cabinet front and at the tub, and the outer one usually comes off by releasing its spring. Seat the new seal evenly all the way round, refit both clamps and run a short rinse to check for leaks.

Questions about this part

Where do I find my washer's model number?

On most Electrolux front loaders the rating label is inside the door opening or on the back of the cabinet. It shows the model, such as EWF1074, along with a product number. Send both through the enquiry form if you'd like us to confirm fit.