12676000000138 Generic Dishwasher Drain Hose suits De'Longhi, Omega Dishwashers 4055361259 ODW700X ODW300X ODW600S ODW707X ED614SX OSI700

Part 12676000000138 is a generic drain hose for De'Longhi and Omega dishwashers, cross referenced to 4055361259. It carries waste water from the pump to your sink trap or standpipe. It's listed for 13 models, including the ODW300X and ODW300XN, the ODW600S and ODW600W, the ODW700X and ODW707X, the ODW717X and OFI604, and the OSI700, ED614SX and HNBD12S.

Dishwasher not draining or leaking from the hose

Every drain cycle pushes hot, dirty water through this hose, so it eventually cracks, splits at the ends or gets crushed behind the cabinet. A damaged hose shows up as water pooling under the dishwasher or in the sink cupboard, a drain that runs slowly, or water left in the tub after the cycle. A kink from pushing the machine back into place can cause the same symptoms, so check the hose's route before deciding it needs replacing. Food and grease build-up inside an old hose can also choke the flow.

Part details

• Generic replacement, part 12676000000138
• Cross referenced to 4055361259
• Dishwasher drain hose
• Listed for 13 De'Longhi and Omega dishwasher models

Replacing the drain hose

Turn the dishwasher off at the wall and close the tap. Have a towel and a shallow tray ready, as some water will drain out. Disconnect the hose at the sink end, then at the pump, which usually means sliding the machine out and removing the kickplate or a side panel. Fit the new hose with a high loop before the sink connection, secure it, and check for leaks on the first drain.

Questions about this part

How do I know the hose will fit?

Match your dishwasher's model, found on the label around the door edge, against the list for 12676000000138. You can also compare the old hose's ends and length with the photo. If you're unsure, send the model through our parts enquiry form.