1193503008 Genuine Bowl to Pump Hose for Electrolux Group Top Load Washing Machines, Internal Washer Drain Hose

Part 1193503008 is a genuine Electrolux bowl to pump hose, the internal hose that carries water from the bottom of the washer's bowl to the pump. It comes from the Electrolux group's top load washing machine parts range. There's no model list on file, so match 1193503008 to your old hose or your machine's parts list, and compare the shape and bends before ordering.

Washing machine leaking underneath

Every drop of water leaving the washer passes through this hose on its way to the pump. Constant flexing, heat from hot washes and detergent slowly perish the rubber, and lint or small objects can lodge at the bends. A split or perished hose usually leaks during the drain or spin, leaving a puddle under the machine. A blocked one causes slow draining, water left in the bowl at the end of the cycle or a pump that runs without moving much water. Check the clamps too, as a loose clamp leaks in the same way.

Part details

• Genuine Electrolux part 1193503008
• Internal hose from the bowl to the pump
• Top load washing machine part
• No model list on file, match the number and shape

Changing the hose

Unplug the washer, turn off the taps and bail out or drain any water left in the bowl. Lay towels down, as some water will still be sitting in the hose. Note how the old hose is routed and clamped, then release the clamps and pull it off both spigots. Fit the new hose the same way without kinks, tighten the clamps and run a short rinse to check for leaks.

Questions about this part

Is this the outside drain hose?

No. It's the internal hose that links the bowl to the pump inside the cabinet. The drain hose that hooks over your trough or into the standpipe is a separate part, so check which one is leaking before ordering.