1119177010 Genuine Sump Screen for Electrolux Dishwashers, Dishwasher Filter Screen Replacement

Genuine Electrolux sump screen 1119177010 sits in the floor of the dishwasher and catches food scraps before the water is drawn into the pumps. If yours is torn, warped or missing, debris can get through and end up blocking spray arms or the drain. The models aren't on our records, so check 1119177010 is the number shown for your dishwasher before buying.

What a damaged sump screen causes

The screen is the first line of defence for the wash and drain pumps. Water flows through it on every cycle, leaving food particles behind for the filter system to deal with. Once the screen splits, bends out of shape or no longer sits flat, those particles go straight into the pumps and spray arms. You might notice gritty residue on dishes, blocked spray arm holes, a grinding or rattling noise from the pump, or a dishwasher that drains slowly. Screens also get damaged when the filter isn't seated properly or a utensil falls through.

Part details

• Genuine Electrolux part 1119177010
• Sump screen for Electrolux dishwashers
• Stops food scraps reaching the pumps
• Dishwasher models not on file

Fitting the sump screen

Switch off at the wall, remove the bottom basket and lift out the filter assembly. Note how the old screen locates in the floor of the tub, including any tabs or screws, then remove it. Wipe out the sump area and clear anything stuck in the pump inlet. Seat the new screen flat, refit the filters until they lock, and run a rinse to check everything drains.

Questions about this part

How often should I clean the sump screen?

Rinse the screen and filters every week or two, or whenever you notice residue on your dishes. Use warm water and a soft brush, and avoid sharp tools that can damage the screen and let scraps through.