1119164018 Genuine Heater to Sump Hose for Electrolux Dishwashers, Dishwasher Internal Water Hose

Part 1119164018 is a genuine Electrolux dishwasher hose, described as the heater to sump hose. It's one of the internal hoses in the base of the machine, carrying wash water between the sump and the heater. Our records don't name the models, so match 1119164018 against your parts list or the number on the old hose before ordering.

Leaks and heating faults from a perished hose

Dishwasher hoses work hot, under pressure and in contact with detergent, so the rubber hardens and cracks over time. A split heater hose usually leaks into the base of the machine, which on many dishwashers trips the flood protection and stops the program with a fault code. You may also see water on the floor, hear the drain pump running when it shouldn't, or find the wash isn't getting hot because water isn't moving through the heater properly. Swollen, soft or cracked ends, or white scale crusting near a joint, are signs the hose is due.

Part details

• Genuine Electrolux part 1119164018
• Internal hose between the heater and the sump
• For Electrolux dishwashers
• Clamps not mentioned in the description

Changing the heater hose

Turn the dishwasher off at the wall and close the tap before you start. Soak up any water in the base tray with a sponge or towel. Note the angle and routing of the old hose, then release the clamps and work it off the heater and sump spigots. Clean the spigots, fit the new hose with the clamps sitting squarely, and run a hot program while you watch for drips.

Questions about this part

Why does my dishwasher show a leak error?

Many dishwashers have a float in the base that trips when water collects there. A leaking internal hose, such as a split heater hose, is a common cause. Find and fix the leak, then dry the base tray before resetting the machine.