1119151296 Genuine Water Sump for Electrolux Dishwashers, Replacement Dishwasher Sump Housing

The water sump is the moulded housing in the floor of the dishwasher tub where wash water collects before it's pumped back through the spray arms or out the drain. This is the genuine Electrolux sump, part number 1119151296. Our records don't list the dishwasher models it suits, so confirm 1119151296 against your model's parts breakdown or any number marked on the old sump.

Dishwasher leaking from underneath? Check the sump

Everything in a dishwasher's water circuit passes through the sump. The filters sit in it, the circulation and drain pumps draw from it, and on many machines the heater and water level sensing connect to it as well. Because it lives with constant heat and water pressure, the plastic can crack, distort or lose its seal against the tub. Common signs are water on the floor under the dishwasher, the anti-flood protection triggering, a leak fault code, or the machine not holding water during the wash. Broken mounting lugs or a warped seal face are also reasons to replace it.

Part details

• Genuine Electrolux part 1119151296
• Water sump for Electrolux dishwashers
• Collects the wash water that feeds the pumps
• Description doesn't mention seals, hoses or filters

Replacing a dishwasher sump

This is one of the bigger dishwasher repairs. Isolate power and water, then pull the dishwasher out and tilt or lay it down as your model allows to reach the base. Photograph every hose, clamp and wire on the old sump before removing it. Use new seals where the sump meets the tub and pumps. Run a short program and check for leaks before refitting the kickboard.

Questions about this part

Does the sump come with the seal or filters?

The description for 1119151296 is just water sump, so plan on reusing or separately buying seals, filters and clamps. Check your parts diagram for their numbers, or ask us through the parts enquiry form.