11048370 Genuine Shock Absorber for Bosch, Siemens Washing Machines, BSH Front Loader Suspension Damper

Looking for 11048370? It's a genuine BSH shock absorber for the tub suspension in Bosch and Siemens front loaders. Dampers wear steadily in a busy washing machine, and a tired one turns every spin cycle into a loud, shaking affair. There's no model list against 11048370 yet, so match it to your parts list, or send us your E-Nr and we'll check it.

Signs the tub suspension is worn

When the drum accelerates, an uneven load throws the tub from side to side. The shock absorbers fixed under the tub turn that movement into friction so it dies away rather than building up. As they wear, they slide with little resistance. Common signs are a heavy thud at the start of spin, the tub striking the cabinet, the machine moving out of its spot, or the washer cutting the spin short because it senses the load is out of balance. Worn dampers can also scrape or squeak.

Part details

• Genuine BSH part 11048370
• Washing machine tub shock absorber
• For Bosch and Siemens front load models
• No model list on file, confirm by part number or E-Nr

Changing the shock absorber

Isolate the power at the wall and close the tap. Each damper is fixed at the base and at a lug on the tub, so you'll need clear access to both points. If they're held with plastic pins, squeeze the tabs and push the pins through rather than levering them. Fit the new damper, make sure both ends are fully seated, then test with a full spin.

Questions about this part

Can I use a different BSH damper number?

Only if BSH lists it for your model. Dampers that look alike can differ in length, strength and end fittings, and the wrong one can leave the tub poorly controlled. Stick with 11048370 if that's the number on your parts list.