11006029 Genuine Shock Absorber for Bosch, Siemens Front Load Washing Machines, BSH Tub Damper Suspension Part

This genuine BSH shock absorber, part 11006029, is a tub damper for Bosch and Siemens front loading washing machines. It fits between the base of the cabinet and the underside of the tub, soaking up the movement as the drum speeds up. BSH uses a range of different dampers, so check that 11006029 matches the number on your parts list, or any number printed on the old damper, before ordering.

Bosch washer banging on spin? Check the shock absorbers

During spin the tub can carry a heavy, uneven load of wet washing, and the shock absorbers stop it bouncing around inside the cabinet. They work with the top springs, which hold the tub up, while the dampers slow its movement down. Once a damper loses its resistance, the tub swings further than it should. You'll hear thumping or banging as the drum gets up to speed, the machine may shuffle across the floor, and the tub can knock against the cabinet or front panel.

Part details

• Genuine BSH part 11006029
• Tub shock absorber (damper) for front load washing machines
• Fits Bosch and Siemens laundry machines that list this number
• No model list on file, confirm by part number

Replacing a washer damper

Unplug the machine and turn off the tap, then pull it out so you can get at the base. Depending on the model, access is through the front kick panel, the back or by tipping the machine over, so work that out before you start. Note how each end of the old damper is fixed, then fit the new one the same way round. Run a spin with a load of towels to check it's quieter.

Questions about this part

Should I replace both shock absorbers?

If your machine has more than one damper and they're the same age, changing them together keeps the tub supported evenly. A new damper working alongside a worn one can still leave the tub moving too much. Your model's parts list shows how many are fitted.