10005506 Genuine Ignitor for Bosch, Siemens, Neff Gas Appliances, BSH Gas Ignition Replacement Part

10005506 is a genuine ignitor from BSH, the maker of Bosch, Siemens and Neff appliances. It's part of the ignition system that lights the gas when you press or turn the control. BSH part numbers are shared across its brands, so the same ignitor can turn up in a Bosch, Siemens or Neff appliance. We don't hold a model list for 10005506, so check the number on your old ignitor or in your appliance's parts list before ordering.

Gas won't light? When the BSH ignitor is at fault

Ignition parts produce the spark that lights the gas at the burner the moment it starts to flow. If the ignitor fails, you may hear no clicking at all, get weak or intermittent sparks, or find some burners spark while others don't, leaving you reaching for matches. Moisture from a spill can cause temporary faults, so let the appliance dry and try again before replacing parts. If the fault stays, test the electrodes and leads as well, since a cracked electrode can mimic an ignitor failure.

Part details

• Genuine BSH part number 10005506
• Gas ignition ignitor
• For Bosch, Siemens and Neff gas appliances
• Model fit not on file, compare with your old ignitor

Fitting the ignitor

Isolate the gas and switch the appliance off at the wall before starting. Photograph each wire and lead connection, then remove the old ignitor and fit the new one in the same position, routing leads clear of hot surfaces. Gas cooking appliances in Australia must be worked on by a licensed gas fitter, and hard-wired units by a licensed electrician.

Questions about this part

Is an ignitor the same as a spark electrode?

Not always. Some makers use ignitor for the spark module that generates the high voltage, and others for the electrode at the burner. Compare your old part with the number 10005506, or send your model number so we can confirm which part you need.