083045300 Genuine Oven Selector Switch for Belling Ovens and Cookers BR900DFSILS BR1100DFSILS BR900ISILS BR1100ISILS BR54DFW FSDF60DOS FSDF61DOWCS

This genuine Belling oven selector switch, part number 083045300, is the EGO switch numbered 42.03000.030. It is listed for more than 70 Belling models, mainly BR900 and BR1100 cookers in both their DF and I versions, as well as the BR54 range and the FSDF60DOS and FSDF61DOWCS. Belling uses more than one selector switch, so match 083045300 or the EGO number on your old switch.

Oven selector switch faults on Belling cookers

Each position of the selector feeds power to a different combination of elements, the fan and the light. As the switch ages, arcing wears the contacts and heat can loosen or brown the terminals. That shows up as one or two settings that no longer heat, an oven that only works when the knob is jiggled, a light that works without any heat, or a switch that has gone stiff or sloppy. A blown fuse or tripped safety switch the moment a setting is chosen can also point to a shorted switch.

Part details

• Genuine Belling part number 083045300
• EGO switch number 42.03000.030
• Oven function selector switch
• Listed for BR900, BR1100 and BR54 models plus FSDF60DOS and FSDF61DOWCS

Fitting the selector switch

Isolate the cooker at the switchboard before you touch the controls. Remove the knob and the control panel, then label or photograph every wire on the old switch. Check the new switch has the same terminal layout before moving any wiring across. Look over the wires for heat damage and replace any brittle terminals. As a hard-wired appliance, the cooker should be worked on by a licensed electrician.

Questions about this part

How is this different from 082558101?

Both are Belling oven selector switches used on BR900 and BR1100 cookers. 083045300 carries EGO number 42.03000.030, while 082558101 is EGO 42.02400.008. Check the number on your old switch to pick the right one.