0701002140 Genuine 6-20 x 9.3 Hex Head Thread Cutting Screw with PH2 Phillips Drive for Electrolux Group Appliances

Electrolux part 0701002140 is a genuine thread cutting screw described as 6-20 x 9.3, with a hex head and a PH2 Phillips recess, so it can be driven with a nut driver or a number 2 Phillips screwdriver. Our records don't say which Electrolux appliance or panel it holds, so order it when 0701002140 appears on your parts diagram or service paperwork.

Why the right Electrolux screw matters

Thread cutting screws form their own thread as they're driven into plastic or thin metal, which is why appliance makers use them for panels, brackets and covers. Swap in a screw that's too long and it can reach a hose or wiring behind the panel, while one that's too short or has the wrong thread won't hold and lets parts rattle or come loose. Holes often get chewed out after a few repairs, and a fresh screw of the correct size bites better than a worn one. A missing screw can also leave a cover or guard sitting out of place.

Part details

• Genuine Electrolux part 0701002140
• Size 6-20 x 9.3
• Hex head with PH2 Phillips recess
• Thread cutting type
• Appliance and position not on file

Using the replacement screw

Unplug the appliance or switch it off at the isolator before taking panels off. Start the screw by hand so it follows the existing thread rather than cutting a new one at an angle. Drive it until snug and stop, as thread cutting screws strip plastic easily if overtightened. If the hole is badly stripped, the mounting point may need repair before any screw will hold.

Questions about this part

Which appliance is this screw for?

Our records give the size and type but not the appliance. The most reliable check is finding 0701002140 on the exploded parts diagram for your model, or comparing an original screw with the 6-20 x 9.3 size and hex PH2 head.