01Y522D Genuine Oven Door Hinge and Guide Set with 64 and 66 Springs for Glem Gas, Emilia Ovens, Glemgas Door Hinge Kit

Part 01Y522D is a genuine Glem Gas oven door hinge and guide set. It comes with two springs, one 64 and one 66, as set out in the part description. Glem Gas builds ovens under its own name and the Emilia brand, and the 01Y522 hinge is used on both, with this D version bundling the guides and springs together. No model list is held for 01Y522D, so confirm it against your oven before ordering.

Oven door dropping open or not closing? Check the hinge springs

Oven door hinges carry the weight of the door and use springs to counterbalance it, so it stays where you leave it and closes firmly against the seal. The guides keep the hinge arms running true as the door moves. Over time springs weaken or snap and guides wear. The door may then fall open with a thud, sit crooked, or leave a gap at the top that lets heat escape and fogs the control panel. Uneven cooking and a hot fascia are often traced to a door that no longer seals.

Part details

• Genuine Glem Gas part 01Y522D
• Hinge and guide set
• Includes one 64 spring and one 66 spring
• For Glem Gas and Emilia ovens

Fitting the hinge set

Let the oven cool and switch it off before starting. Open the door fully, lock the hinge clips if your hinges have them, and lift the door away. Springs are under tension, so keep fingers clear and don't let an arm snap back. Put each spring back in the position it came from, then check the door opens smoothly and closes evenly.

Questions about this part

Why are there two different springs in the set?

The description lists one 64 spring and one 66 spring. Before removing anything, check the markings on your old springs and note which side each came from, then fit the new ones in the same positions.