00110278 OEM Aquastop Inlet Hose suits Bosch, Siemens, Neff Dishwashers, Replaces 00668113 Safety Water Inlet Hose

Bosch, Siemens and Neff dishwashers fitted with Aquastop protection use a special inlet hose with a safety valve built into the tap end. The 00110278 is an OEM grade replacement for hose number 00668113. It's an aftermarket hose built to the original specification, not one supplied by BSH. Check that your parts list or old hose shows 00668113 before ordering.

Bosch dishwasher Aquastop hose leaking or not letting water in

Aquastop is a leak protection system. The hose has an inner water line inside an outer sleeve, and a valve at the tap end that shuts off the water if the dishwasher detects a leak in its base. If the inner hose splits, water collects in the sleeve and runs back to the dishwasher's base pan rather than onto the floor. When the valve or hose fails, the dishwasher may not fill and show a water supply error, or water may weep from the valve housing at the tap. Kinks or crush damage along the outer sleeve are another reason to replace it.

Part details

• Part number 00110278, OEM grade
• Replaces Aquastop hose 00668113
• Safety valve at the tap end
• Inner hose inside an outer leak sleeve
• Suits Bosch, Siemens and Neff dishwashers using 00668113

Fitting the Aquastop hose

Switch the dishwasher off at the wall and turn the tap off. Pull the dishwasher out, remove the kickboard and base cover, and note how the old hose connects inside, including the electrical connection to the valve. Route the new hose without kinks, connect it at the machine end, then screw the valve onto the tap by hand. Turn the water on slowly and check for drips before running a wash.

Questions about this part

Is this hose made by Bosch?

No, it's an OEM grade aftermarket hose made to the specification of 00668113. It suits the Bosch, Siemens and Neff dishwashers that use that hose number. Check your parts list or the old hose for 00668113 before you order.